D4L 2.4GHz 4in1 Radio System

Description

The Orlandoo Hunter D4L 2.4GHz 4in1 Radio System provides multi-functionality for micro sized RC vehicles. It features a 4-in-1 receiver unit with a built in ESC, sound unit and light controller. Sound and light can be controlled from the the transmitter. This radio system is a must-have accessory to simplify your electronics setup, while adding increased functionality and simulation to your favorite micro RC!

The package includes a speaker and all the necessary LEDs to light up your micro RC. You also get all the various wires, plugs and heatshrink required for you to solder yourself. The light controller also comes with a separate jumper board – attach this to your RC bodyshell for easy one-plug removal.

***New for 2024 – the D4L-T***

Choose between the classic D4L and the new D4L-T! If you want all the features of the D4L, but with big rig sounds, you can now opt for the D4L-T combo. This replaces the D401E 4-in-1 receiver unit for the new D401T, which comes preloaded with two different truck engine sounds. The sounds provided by the original D401E are more suited for smaller mini-truck size vehicles. So if you run a Defender or Jeep the D401E is the better choice.

Features

Integrated functions include:

• 2.4GHz Receiver
• ESC with forward, reverse and brake function
• Sound module simulates engine start up, forward, reverse, idle and engine shut down sounds
• Light controller provides headlights, auxiliary lights, hazard warning lights, turn signals, brake lights and reverse lights

Specifications: D4L 2.4GHz 4in1 Radio System

Transmitter:

• Operating Voltage: 4.4-8.4V
• Frequency: 2.4GHz
• FHSS Output Power: 100mW
• Power Supply: 4 AA Batteries
• Screen Type: Segment LCD

Receiver Module:

• Operating Voltage: 6V-8.4V (2S LiPo or 6 cell NiMH)
• ESC: Brushed Motor up to 1.8A
• Sound Simulator: Amp up to 4.5W
• BEC: Output 3.3V/0.8A
• Low voltage cut off: @6V

Includes

PLEASE NOTE: The JST RCY Adapter shown in the images is no longer included with this set – two JST PH2.0 Motor wires are provided instead.

• (1) D4L Transmitter
• (1) Choice of D401E or D401T 4-in-1 Receiver
• (1) Light Expansion PCB
• (2) Motor lead
• (1) On/Off Switch
• (1) Speaker box
• (4) 4mm white LED
• (1) SMD 4 Color LED
• (1) Seven color teflon wire
• (2) Heat shrink tube
• (1) Transparent Heat shrink tube